With the continuous development of industrial automation, more and more production processes are beginning to achieve automated operations, and the gluing process is no exception. Traditional manual gluing not only has low efficiency, but also often leads to problems such as glue waste and inconsistent quality due to unstable human operation.
Learn more +
Replacing the glue on the glue filling machine is a delicate task that must be carried out according to the specified operation instructions, otherwise it may cause irreversible equipment damage.
Learn more +
The glue used in the fully automatic glue filling machine belongs to a substance similar to colloids, which has insulation properties. When used for sealing explosion-proof electrical boxes, it can have a certain degree of leakage prevention. However, the prerequisite is that the fully automatic glue filling machine equipment used can meet the sealing conditions, otherwise it cannot play a role in leakage prevention. Therefore, the fully automatic glue filling machine can achieve leakage prevention during dispensing.
Learn more +
The principle of vacuum generator generating vacuum is different from that of traditional vacuum pump. It creates a high-speed airflow of compressed air inside the pump body. As we all know, the higher the flow velocity of the gas, the lower the local gas pressure (as can be obtained from the Bernoulli equation), thus having stronger suction capacity.
Learn more +
Although the automatic dispensing machine appears to be a simple mechanical device. However, it also requires a certain level of technical expertise to use it properly, especially during installation. If there are errors during installation, it can easily cause malfunctions in the hot melt adhesive machine, resulting in adverse effects. Therefore, when purchasing an automatic dispensing machine, we need to hire professional personnel for installation work.
Learn more +
Make sure to use black pipes. Do not directly add UV glue to the existing UV glue in the pressure cylinder. First, release the original UV glue, and then pour the UV glue into the empty pressure cylinder The UV glue inside the pressure cylinder often generates bubbles after a period of time, causing unstable glue output.
Learn more +
Add WeChat